Omega Speaker Systems High Speed Load Cell Interface Card LCIC-WIM-BEN Manual de usuario descargar pdf (Pagina 57)

D.2 Baud Rate

For the USB, the maximal baud rate is 921,600. The board responds well

without a need to pre-define the used b/r.

For serial communication, the required b/r should be pre-defined by the

user via the Settings utility (section 3.3). The available baud rates are

between 19,200 and 115,200. The current b/r used by the board for the

serial communication is shown for a while on the LED display upon card

reset, prefixed by ‘Sb’ (=Serial baud rate). Refer also to sections 3.3.1.2

& 3.3.2.1.2.

D.3 General RS232 Terminal

You may talk with the card either by your own application or by a general

RS232 terminal. One simple one called Termite is available for free at

http://www.compuphase.com/software_termite.htm

D.4 Serial Communication & PC Power On/Off

After PC power on or off the serial communication (RS232/RS485) is

likely to drop. A card reset is needed in this case.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 85 86

Sin comentarios

Omega Speaker Systems High Speed Load Cell Interface Card LCIC-WIM-BEN Manual de usuario Pagina 57