Omega Speaker Systems High Speed Load Cell Interface Card LCIC-WIM-BEN Manual de usuario Pagina 36

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 86
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 35
35
23
Filter1 value: 2-256.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
24
Filter2 value: 2-256.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
25
Decimator: 1-1000.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
101
General Setpoint1.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
102
General Setpoint2.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
103
General Setpoint3.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
104
General Setpoint4.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
111
Output1 Mode 0=manual, 1=general setpoint.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
112
Output2 Mode 0=manual, 1=general setpoint.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
113
Output3 Mode 0=manual, 1=general setpoint.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
114
Output4 Mode 0=manual, 1=general setpoint.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
115
Baud rate for the RS232/RS485 port.
Possible values:
19200, 28800, 38400, 57600, 115200.
Note
The baud rate for the USB need not be defined –
its upper limit is 921,600.
Float
Vista de pagina 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 85 86

Comentarios a estos manuales

Sin comentarios