Omega-speaker-systems High Speed Load Cell Interface Card LCIC-WIM-BEN Manual de usuario descargar pdf (Pagina 22)

* The rate of updating the analog output is depends on the

Update Frequency parameter. For example, when Update

Frequency is 4, the analog output is updated 4 times a second.

3.3.1.1 Tools / Analog Output

The ‘Settings’ utility gives access to the analog output mechanism:

Click ‘Tools’ / ‘Analog Output’.

For ‘manual’ mode

uncheck the ‘Activate Auto Mode’ box.

For ‘auto’ mode

check the ‘Activate Auto Mode’ box.

Manual Mode

On the top of the display, specify a desired voltage in the ‘Manual Mode’

square and click ‘Send’.

Auto Mode

Specify the following parameters:

1. Voltage Max.

2. Weight Max.

3. Weight Min.

4. Update Frequency

The Auto Mode works like this:

* When the current weight = Weight Min. or less, the analog

output is set to 0.

* When the current weight = Weight Max. or more, the analog

output is set to Voltage Max.

* When the current weight is between Weight Min. and Weight

Max., the analog output is set between 0 and Voltage Max., in

the same ratio.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 85 86

Sin comentarios

Omega-speaker-systems High Speed Load Cell Interface Card LCIC-WIM-BEN Manual de usuario Pagina 22